FLUKE

Product Details:

87-V INDUSTRIAL TRUE RMS MULTIMETER

• Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
• Large display digits and 2 level bright white backlight for increased visibility
• Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition ANSI and IEC electrical safety standards
• Improved sleep mode for long battery life
• Relative mode to remove test lead resistance from low ohms measurements
• Auto and manual ranging for maximum flexibility
• Limited Lifetime Warranty

Product Details:

• Rated for industrial environments CAT III 1000 V/CAT IV 600 V
• Automatically capture, view and analyze complex waveforms
• Large, bright color display for easy in-the-field viewing
• USB and Wi-Fi download for analyzing data with FlukeView® software
• Up to four independent floating isolated inputs, up to 1000 V

Product Details:

Fluke 179 True-RMS AC/DC Digital Multimeter, 1000V with Analog Bargraph, Backlight and Temperature Measurement

• Bright backlight display to see the screen in almost any light
• Comes with the 80BK temp probe
• Measures temp in F and C
• IEC 1010 CAT IV 600V, CAT III 1000V. This means it is safe for use in more applications
• Industry Leading Limited Lifetime Warranty
• True-rms ac voltage and current for accurate readings on all waveforms
• 6000 count display
• Measures frequency, capacitance & resistance
• Min/Max/Average
• Drop tested to 1 meter
• Overmolded case with built in probe holders
• One of the best selling multimeters in the Fluke line
• Measures current DC and AC to 10 A

Product Details:

773 Milliamp Process Clamp Meter with Loop Power, 4-20 mA and DC Volts Source/Measure

• Best in class 0.2 % accuracy
• 0.01 mA resolution and sensitivity
• Measure 4 to 20 mA signals without ”breaking the loop”
• Measure mA signals for PLC and control system analog I/O
• Dual backlit display with both mA measurement and percent of 4 to 20 mA span
• Measurement Spotlight illuminates hard to see wires in dark enclosures
• Detachable clamp with extension cable for measurements in tight locations
• Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
• Automatically change the 4 to 20 mA output for remote testing
• Power saving features, auto-off, backlight timeout extend battery life
• Hold function captures and displays changing measurements

Product Details:

EARTH GROUND LOOP AND LEAKAGE CLAMP

• Earth ground ac leakage current measurement - Identify ac leakage currents without disconnecting the earth ground stake from the grounding system–ideal for system troubleshooting
• Rugged - Heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments
• Logging measurements - The earth ground clamp saves time by automatically recording data at pre-set intervals and saves up to 32,760 measurements in memory at the set logging interval. Saves time by recording and storing measured values
• Alarm threshold - User-defined high/low alarm limits, for rapid measurement evaluation
• Band-pass filter - Selectable band-pass filter function removes unwanted noise from the ac leakage current measurement

Product Details:

• Compact digital multimeter and mA loop calibrator solution
• Full-featured mA loop calibrator with built-in 24v Loop Power
• Quickly and easily troubleshoot every part of a control loop
• Large, bright dual-measurement display

Product Details:

• Compact digital multimeter and mA loop calibrator solution
• Measure/Source/Simulate loop currents while powering the loop
• Manual and automatic ramp up - ramp down functions
• Easy-to-read backlit display

Product Details:

• Measure voltage and current with your clamp jaw
• Faster, safer testing - all without touching a live wire - using FieldSense™ technology
• Complete 3-phase voltage and current tests in 3 quick steps

Product Details:

• Three-phase power quality recorder fully compliant to IEC 61000-4-30 Class-A and consistent with compliance testing
• Uses GPS time synchronization to correlate data with events or datasets from other instruments with precision
• Offers flexible and fully configurable thresholds and scale factors to allow users to define detailed criteria for detecting and recording disturbances

Product Details:

• Measure safely with CAT III 1500 V rated clamp meter
• Thin jaw for access to cables in crowded combiner boxes
• Sturdy IP54 rated for outdoor use and solar installation
• Work efficiently with dc power measurement, audio polarity and visual continuity

Product Details:

• Measures AC current with included 18-inch or 36-inch iFlex current probe
• VFD low pass filter for accurate measurements of non-linear signals
• Remotely log, trend and monitor to pinpoint intermittent faults
• Inrush measurement to filter out noise and capture starting current

Product Details:

• Three-phase power quality recorder fully compliant to IEC 61000-4-30 Class-A and consistent with compliance testing
• Uses GPS time synchronization to correlate data with events or datasets from other instruments with precision
• Offers flexible and fully configurable thresholds and scale factors to allow users to define detailed criteria for detecting and recording disturbances

Product Details:

• Three-phase power quality recorder fully compliant to IEC 61000-4-30 Class-A and consistent with compliance testing
• Uses GPS time synchronization to correlate data with events or datasets from other instruments with precision
• Offers flexible and fully configurable thresholds and scale factors to allow users to define detailed criteria for detecting and recording disturbances

Product Details:

• Measure voltage and current with your clamp jaw
• Faster, safer testing - all without touching a live wire - using FieldSense™ technology
• Power quality indicator shows whether equipment or power line is faulty
• Complete 3-phase voltage and current tests in 3 quick steps

Product Details:

• Dual-input digital oscilloscope and multimeter in a ScopeMeter® test tool
• Available with a 40 MHz or 20 MHz oscilloscope bandwidth
• Features Connect-and-View™ trigger simplicity for hands-off operation
• Includes IntellaSet™ technology to automatically and intelligently adjust numerical readout based on measured signal
• Provides a dual-input waveform and meter reading recorder for trending data over extended periods

Product Details:

• Advanced clamp meter that transmits measurements to your smartphone via Fluke Connect® for viewing at a safer distance
• Performs AC and DC current measurements to 600 A, and AC and DC voltage measurements to 1000 V
• Measures AC current to 2500 A AC with optional iFlex flexible current probe
• Measures resistance to 6000 Ω with continuity detection

• Measure voltage to 1000 V AC without test leads
• Simultaneously measure voltage and current
• 17.8 mm open fork is widest in the industry
• Measure up to 200 A on 4/0 wires (120 mm2)

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

• Validate Cable Performance up to 10GBASE-T via frequency-based measurements
• Get connected switch data rate, switch name, IP address, port number, and VLAN
• Detect the PoE class (1-8) and power, and perform a load test
• Test connectivity to TCP/IP network through IP configuration and ping

• Key measurements: Automatically capture and log voltage, current, power, power factor, energy and associated values
• Convenient instrument powering: You can power the instrument directly from the measured circuit instead of mains outlets
• Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

• True-rms AC/DC current, voltage, temperature, frequency
• Clamp meter, test leads, K-type thermocouple and soft case
• Versatile tool performs most front-line measurement tasks

Product Details:

• Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement with measurement accuracy
• Removable magnetic display can be mounted where it is easily seen
• iFlex® Flexible Current Probe expands the measurement range to 2500 A AC
• CAT IV 600 V, CAT III 1000 V

Product Details:

• A wireless Fluke Connect®-enabled clamp meter designed specifically for the needs of HVAC technicians
• Offers 200 µA DC current measurements to measure flame rod
• Extends resistance range to measure thermistors up to 60kΩ
• Captures flue gas temperature
• Measures start and run motor capacitors
• Measures variable frequency drive performance

• Measure safely with CAT III 1500 V rated clamp meter
• Thin jaw for access to cables in crowded combiner boxes
• Sturdy IP54 rated for outdoor use and solar installation
• Work efficiently with dc power measurement, audio polarity and visual continuity

Additional Information:

• Minimum Order Quantity: 1 Piece

• Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
• AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
• Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
• Logging measurement: Saves up to 32,760 measurements in memory

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

• 200 A AC and DC current measurement with detachable jaw
• 600 VAC and DC voltage measurement
• Detachable jaw makes accessing wires and viewing the display easier
• Built in flashlight/torch allows for easy illumination and identification of wires
• CAT III 600 V
• Compact design fits in your hand and can be used while wearing protective equipment
• State of the art signal processing allows for use in noisy electrical environments while providing stable readings
• Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement
• Three-year warranty
• Soft carrying case

Product Details:

• Rugged, reliable basic True-RMS clamp meter for measuring current up to 400 A
• Measures AC current to 400 A
• Measures AC voltage and DC voltage to 600 V
• Provides True RMS AC voltage and current for accurate measurements on non-linear signals
• Measures resistance to 4 kΩ with continuity detection

Product Details:

• A top performing True-RMS current clamp for AC-only current measurements to 600 A
• Measures AC and DC voltage to 600 V
• Measures resistance to 6000 Ω with continuity detection
• Offers state of the art signal processing to provide stable readings even in noisy electrical environments

Product Details:

• 200 A AC and DC current measurement with detachable jaw
• 600 VAC and DC voltage measurement
• Detachable jaw makes accessing wires and viewing the display easier
• Built in flashlight/torch allows for easy illumination and identification of wires
• CAT III 600 V
• Compact design fits in your hand and can be used while wearing protective equipment
• State of the art signal processing allows for use in noisy electrical environments while providing stable readings
• Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement
• Three-year warranty
• Soft carrying case

Product Details:

• High performance clamp meter that measures very low voltage and high resistance
• Transmits measurements to your smartphone via Fluke Connect® so you can view them at a safer distance
• Measures AC and DC current to 600 A, and AC and DC voltage to 1000 V
• Measures AC current to 2500 A AC with optional iFlex flexible current probe

Product Details:

• Measure 4 to 20 mA signals without breaking the loop
• Source/simulate 4 to 20 mA signals and provide loop power
• Source/measure DC voltage to verify power supplies or I/O signals
• Best in class accuracy of 0.2%
• Delivers 0.01 mA resolution and sensitivity

Product Details:

• Reliably handle a wide range of high-current applications with 2000 A AC + DC True RMS, 1400 A AC, and 2000 A DC
• The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
• CAT IV 600 V, CAT III 1000 V rating for added user protection
• In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability

Product Details:

• Reliably handle a wide range of high-current applications with 2000 A AC + DC true-rms, 1400 A ac, and 2000 A DC
• The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
• CAT IV 600 V, CAT III 1000 V rating for added user protection
• In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability
• Accurately measure frequency up to 1 kHz for optimum troubleshooting
• Quickly analyze readings using the MIN, MAX, and AVG functions
• A large backlit display allows for easy visibility in low-lit areas
• Use the display hold feature to capture readings even when the display cannot be viewed
• Use the low-pass filter to smooth out noisy loads and stabilize readings

Product Details:

• Loop meter that measures 4 to 20 mA signals without breaking the loop
• Features best in class 0.2% accuracy
• Simultaneously measures the mA signal with the clamp and sources a mA signal
• Delivers 0.01 mA resolution and sensitivity
• Measures mA signals for PLC and control system analog I/O

Product Details:

• Measures 4 to 20 mA signals without breaking the loop
• Best in class 0.2% accuracy
• Delivers 0.01 mA resolution and sensitivity
• Measures mA signals for PLC and control system analog I/O
• Detachable clamp for measurements in tight locations

Product Details:

• Simple operation – Plug into socket; with the bright, easy-to-see LEDs, verify correct wiring or identify common wiring problems in both standard and GFCI outlets
• Know more, faster –with the handy chart, quickly identify one of six wiring conditions for the outlet
• GFCI outlets–with an integrated GFCI test, you can feel secure knowing that your GFCI equipped outlets are functioning properly

Product Details:

• True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms
• 40 mm jaw opening
• Highest resolution of 1 μA, measure up to 60 A
• Selectable filter function removes unwanted noise
• Max/Min/Average readings and hold function
• Forward-facing LED worklight for use in dark wiring cabinets
• Backlit display; auto backlight off and auto power off for extended battery life
• CAT III 600V safety rating
• Internal Memory Logging: up to 65,000 measurement points

Product Details:

• True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms
• 61 mm jaw opening
• Highest resolution of 1 μA, measure up to 60 A
• Selectable filter function removes unwanted noise
• Max/Min/Average readings and hold function
• Forward-facing LED worklight for use in dark wiring cabinets
• Backlit display; auto backlight off and auto power off for extended battery life
• CAT III 600V safety rating

Product Details:

“It does everything a HVAC or Maintenance Tech would need. Out of 12 guys I work with 9 of them had the 324” - Thomas

• Rugged, reliable basic True-RMS clamp meter
• Measure AC current up to 400 A, AC/DC voltage to 600V
• Measure resistance up to 4kΩ, continuity detection ≤ 30Ω
• Additions from 323 Clamp: Temperature, Capacitance, Backlight

• Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement with measurement accuracy
• Removable magnetic display can be mounted where it is easily seen
• iFlex® Flexible Current Probe expands the measurement range to 2500 A AC
• CAT IV 600 V, CAT III 1000 V

Product Details:

• Six-phase power analyzer for developing frequency converters and lighting equipment
• Features the highest bandwidth on the market
• Measures voltage, current, and power harmonics up to the 40th harmonic
• Features a simple user interface to ensure easy, intuitive operation
• Offers a variety of standard configurations so users can choose the exact functionality required for their application