Hand Tools

Product Details:

TAPARIA Adjustable Spanners are:-

• Forged with high grade steel, and heat treated to give long trouble free service.

• Left hand thumb screw movement as standard.Right hand thumb screw movement available om request.

• Precision marked scale indicate correct jaw opening.

• Available in bright polished Nicel Chrome finish and Black Phosphate finish.Also available with soft grip to provide comfortable gripping in use.

Product Details:

Testers, Screwdrivers & Sets

TAPARIA^® Offer the most comprehensive range of screw drivers:-

• Made out of High Grade Steel and Transparent green cellulose acetate handle.

• The handle is made from high grade C. A. Plastic which is non flammable and unaffected by oil petrol, grease, water etc.

• It is available in wide variety of different tip size & length.

• It is Generally Conforming to IS 844-1979

Product Details:

The blade is made from high grade Silicon - Manganese steel which no other make uses. This steel gives spring effect also.

The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

The blade tip is magnetised to lift small screw etc.from confined spaces or to hold the the screw in position.

Product Details:

Mini Pliers

TAPARIA Mini pliers are:-

• Made from high grade carbon steel.

• Springs provided between legs and Dip coated sleeves.

Product Details:

Mini Pliers

TAPARIA Mini pliers are:-

• Made from high grade carbon steel.

• Springs provided between legs and Dip coated sleeves

Product Details:

Sockets

TAPARIA Sockets are:-

• Forged from high grade Chrome Vanadium steel.

• Scientifically heat treated to give maximum strength and wer resistance.

• Nickel Chrome plating finish to enable rust prevention and good looks.sockets

Product Details:

Box Spanners

Generally Conforming to IS 2030-1989

Up set forged from high grade manganese steel.Scientifically heat treated to give maximum strength, wear resistance and long life. Available with bright finish in Nickle Chrome and black phosphate finish for protection from corrosion.

Product Details:

SOCKET:10,11,12,13,14,15,16,17,1819,20,21,22,23,24,26,27,30,32.
ACCEESSORIES:Ratchet Wrench 250
SlidingT-handle250
Speed handle 400
Drive Extention 125,250
Universal set 75
screw driver socket 52 
Socket set box

Product Details:

Testers, Screwdrivers & Sets

TAPARIA^® Offer the most comprehensive range of screw drivers:-

• Made out of High Grade Steel and Transparent green cellulose acetate handle.

• The handle is made from high grade C. A. Plastic which is non flammable and unaffected by oil petrol, grease, water etc.

• It is available in wide variety of different tip size & length.

• It is Generally Conforming to IS 844-1979

Product Details:

M22520/2-01 Miniature Adjustable Indent Crimp ToolAFM8

• Qualified to MIL-DTL-22520/2* and AS22520/2*
• Accommodates Daniels "K" positioners

Product Details:

Pneumatic Indent Crimp Tool - AFM8 EquivalentWA22

• Equivalent to AFM8 (M22520/2-01)

Product Details:

Pneumatic Indent Crimp Tool - MH860 EquivalentWA22

• Equivalent to MH860 (M22520/7-01)

Product Details:

 Pneumatic Indent Crimp Tool - AF8 EquivalentWA27F

• Equivalent to AF8 (M22520/1-01)

Product Details:

M22520/1-01 Standard Adjustable Indent Crimp ToolAF8

• 12 - 26 AWG Wire Range
• Qualified to MIL-DTL-22520/1 and AS22520/1
• Accommodates Daniels single and multiple position turret heads

Product Details:

M22520/1-01 Standard Adjustable Indent Crimp ToolAF8

• 12 - 26 AWG Wire Range
• Qualified to MIL-DTL-22520/1 and AS22520/1
• Accommodates Daniels single and multiple position turret heads

Product Details:

Screw Driver Bits & Sets

TAPARIA Screw Driver Bits are:-

• Accurately hardened & Tempered to 56-60 HRC.

• To withstand high torque and high wear resistance properties.

• Precisely machined Philips, Torx, Flat& Hexagon Tips.

• One of the widest range of quality Screw Driver Bits in India.

Product Details:

CHROME VANADIUM Taparia Vice Grip Plier

Product Details:

Screw Driver Bits & Sets

TAPARIA Screw Driver Bits are:-

• Accurately hardened & Tempered to 56-60 HRC.

• To withstand high torque and high wear resistance properties.

• Precisely machined Philips, Torx, Flat& Hexagon Tips.

• One of the widest range of quality Screw Driver Bits in India.

Product Details:

Open Frame Crimp Tool 

Product Details:

Double Ended Spanners (Chrome Plated)

Generally Conforming to IS 2028-2004

It is made from high grade steel,forged and accurately machined.Hardened and tempered to give long trouble free service. Provide with appropriate surface protection for rust prevention.

Product Details:

Chain Pipe Wrench

Generally Conforming to IS 4123 - 1982

Drop forged jaws with high - grade steel.An accurately machined jaw teeth on both sides of the jaw provides firm gripping and are easy for reverse operation. Scientifically heat - treated to give maximum strength and wear resistance.

Product Details:

Combination Pliers

Generally Conforming to IS 6149-1984 Grade II

The Pliers made from high grade Steel, forged and differentially heat treated to give best performance. Fully insulated with quality plastic material sleeves ensures safe electrical working.

It has excellent wire cutting ability for soft and hard wires. Available with fully polished head or Black phosphated and bright polished head.

Product Details:

Flat Screw Drivers

The blade is made from high grade Silicon - Manganese steel which no other make uses. This steel gives spring effect also.

The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

The blade tip is magnetised to lift small screw etc.from confined spaces or to hold the the screw in position

Product Details:

Adjustable 1171 PF,200 BP Hammer with handle,Screw driver set 821,Screw driver 725,Three in one tester 817 + 1413,Pliers 1621 6j,Rowel punch,Rowel plug 5 x 20mm Lubricating oil bottle,Knife,Nylon washer,Fuse wire 5 amp & 15amp,Insulation tape 20mm,Araldite-Hardner + Resin,M seal,Oil stone 1/2tri x 50mm,Nails 1/2 & 1,Nails 1 1/4,Nails 1 3/4,Woods screw 1/2,Woods screw 1

Product Details:

Spirit Level

TAPARIA Spirit levels

• Have precision milled base for high accuracy.

• Have a solid spirit bulb which doesn't break easily.

• Are special and lasts for a long time.

• The Aluminum frame is strong and precision extruded which increases accuracy and strength of the Spirit levels.

• Rubber moulding is provided on the sides of the spirit levels to prevent damage to the body of the spirit levels.

• Available in two ranges i.e. lmm/meter accuracy and 0.50mm/meter accuracy to cater to regular and high precision requirements.

Product Details:

Pneumatic Crimp ToolPHX3

Product Details:

Torque Wrench

TAPARIA Torque Wrenches are:-

• Made from hugh grade steel to with stand maximum fatigue,wear and tear.

• All load bearing components are appropriately heat treated and toughened for long life and durability.

• Compact and robust design ensures ease in operation and safety in ruged terrains.

• Three way signal-touch,sight and sound.

• Push through moveable square permits use on both right hand and left hand directions.

• Positive setting without the need for any calibration rig.

• Calculated leverage to reduce labour fatigue.

• No violent kick back and automatic resetting after it clicks.

Product Details:

Open Frame Pneumatic Crimp MachineHX33

• Accommodates Daniels "Y" series crimp dies

Product Details:

Work with confidence.

You’ve always trusted Fluke for the best in intrinsically safe measurement tools. Now, Fluke expands this line to include safe, convenient and rugged flashlights to help you see the work you’re doing, wherever you may be.

The FL-120 EX is comfortable enough for everyday use. This light fits in your tool belt and features an ergonomic design with an overmolded rubber grip and a push-button for high and low light modes.

Key features

 

Comfortable enough for everyday use

Intrinsically safe flashlights from Fluke make working in hazardous zones a little less hazardous. Rugged and reliable. Safety certified. From the largest supplier of intrinsically safe measurement tools.

• UL certified – CLASS I DIV 1&2 GRP ABCD; CLASS II DIV 1&2 GRP EFG
• Protected from harsh environments – IP6X rated
• Built with Fluke’s reputation for safety, dependability and ruggedness
• Part of Fluke’s market leading line of intrinsically safe products

Product Details:

Consists of a TAPARIA^® Line Tester and an easily attachable extension cord with a Test Probe. Easily checks ‘live’ or Neutral wire, continuity or break in circuit. Identifies two different phases. Ideal for domestic use.

In phase line where board is open lamp hold will not work at 440 V bulb will be damaged where as 3 in 1 tester will indicate this different phase of 440 V by glowing more brightly.

If we get phase from one wire and at the other end bulb does not glow indicate wires are from same phase.

Product Details:

Testers, Screwdrivers & Sets

TAPARIA^® Offer the most comprehensive range of screw drivers:-

• Made out of High Grade Steel and Transparent green cellulose acetate handle.

• The handle is made from high grade C. A. Plastic which is non flammable and unaffected by oil petrol, grease, water etc.

• It is available in wide variety of different tip size & length.

• It is Generally Conforming to IS 844-1979

Product Details:

To Measure 12V to 220V AC and DC Voltage. To locate break point of an insulated wire. To check flow of current in an insulated wire from outside.

Product Details:

Testers, Screwdrivers & Sets

TAPARIA^® Offer the most comprehensive range of screw drivers:-

• Made out of High Grade Steel and Transparent green cellulose acetate handle.

• The handle is made from high grade C. A. Plastic which is non flammable and unaffected by oil petrol, grease, water etc.

• It is available in wide variety of different tip size & length.

• It is Generally Conforming to IS 844-1979

Product Details:

Testers, Screwdrivers & Sets

TAPARIA^® Offer the most comprehensive range of screw drivers:-

• Made out of High Grade Steel and Transparent green cellulose acetate handle.

• The handle is made from high grade C. A. Plastic which is non flammable and unaffected by oil petrol, grease, water etc.

• It is available in wide variety of different tip size & length.

• It is Generally Conforming to IS 844-1979

Product Details:

Testers, Screwdrivers & Sets

TAPARIA^® Offer the most comprehensive range of screw drivers:-

• Made out of High Grade Steel and Transparent green cellulose acetate handle.

• The handle is made from high grade C. A. Plastic which is non flammable and unaffected by oil petrol, grease, water etc.

• It is available in wide variety of different tip size & length.

• It is Generally Conforming to IS 844-1979

Product Details:

Testers, Screwdrivers & Sets

TAPARIA^® Offer the most comprehensive range of screw drivers:-

• Made out of High Grade Steel and Transparent green cellulose acetate handle.

• The handle is made from high grade C. A. Plastic which is non flammable and unaffected by oil petrol, grease, water etc.

• It is available in wide variety of different tip size & length.

• It is Generally Conforming to IS 844-1979

Product Details:

Mini Pliers

TAPARIA Mini pliers are:-

• Made from high grade carbon steel.

• Springs provided between legs and Dip coated sleeves

Product Details:

Mini Pliers

TAPARIA Mini pliers are:-

• Made from high grade carbon steel.

• Springs provided between legs and Dip coated sleeves

Product Details:

Generally Conforming to IS 5579-1985

TAPARIA^® Line Tester has high quality blade and cellulose acetate plastic Handle.Fully insulated blade ensures shock proof working. Distinct glow of Neon lamp identifies line ‘live’. Features a clip for safe carrying in pocket. Available in several sizes

Product Details:

Mini Pliers

TAPARIA Mini pliers are:-

• Made from high grade carbon steel.

• Springs provided between legs and Dip coated sleeves.