FLUKE 1

Product Details:

• Class E/Cat 6 certification tests in just 9 seconds
• Class EA/Cat 6A in 10 seconds
• Advanced user interface with gesture-based touchscreen
• Simplified project management that makes setup fast and foolproof
• Built-in diagnostics pinpoint common faults
• Permanent Link adapters also available

Essential Cat 6A and Class EA Copper Certification featuring ten second test times and advanced user interface. Includes channel measurement adapters; Permanent Link adapters also available. Manage jobs and testers from any smart device over Wi-Fi with LinkWare™ Live. Features legendary Fluke Networks reliability backed by worldwide support.

Essential Cat 6A and Class EA Copper Certification featuring ten second test times while meeting industry’s most stringent accuracy requirements. Advanced user interface with gesture-based touchscreen and simplified project management that makes setup fast and foolproof. Built-in diagnostics pinpoint common faults. Includes channel measurement adapters; Permanent Link adapters also available. Upload results directly from the jobsite over Wi-Fi and generate reports with industry standard LinkWare™. Manage jobs and testers from any smart device over Wi-Fi with LinkWare™ Live. Features legendary Fluke Networks ruggedness and reliability backed by worldwide support.

Product Details:

Display accuracy

Dry-wells are typically calibrated by inserting a calibrated PRT into one of the wells and making adjustments to the calibrator’s internal control sensor based on the readings from the PRT. This has limited value because the unique characteristics of the reference PRT, which essentially become “calibrated into” the calibrator, are often quite different from the thermometers tested by the calibrator. This is complicated by the presence of significant thermal gradients in the block and inadequate sensor immersion into blocks that are simply too short.

Metrology Wells are different. Temperature gradients, loading effects, and hysteresis have been minimized to make the calibration of the display much more meaningful. We use only traceable, accredited PRTs to calibrate Metrology Wells and our proprietary electronics consistently demonstrate repeatable accuracy more than ten times better than our specs, which range from ±0.1 °C at the most commonly used temperatures to ±0.25 °C at 661 °C.

Product Details:

Dry-wells are typically calibrated by inserting a calibrated PRT into one of the wells and making adjustments to the calibrator’s internal control sensor based on the readings from the PRT. This has limited value because the unique characteristics of the reference PRT, which essentially become “calibrated into” the calibrator, are often quite different from the thermometers tested by the calibrator. This is complicated by the presence of significant thermal gradients in the block and inadequate sensor immersion into blocks that are simply too short.

Metrology Wells are different. Temperature gradients, loading effects, and hysteresis have been minimized to make the calibration of the display much more meaningful. We use only traceable, accredited PRTs to calibrate Metrology Wells and our proprietary electronics consistently demonstrate repeatable accuracy more than ten times better than our specs, which range from ±0.1 °C at the most commonly used temperatures to ±0.25 °C at 661 °C.

An application note is available to help better understand the uncertainties mentioned above.

For even better accuracy, Metrology Wells may be ordered with built-in electronics for reading external PRTs with ITS-90 characterizations. (See sidebar, Built in Reference Thermometry)

Product Details:

Display accuracy

Dry-wells are typically calibrated by inserting a calibrated PRT into one of the wells and making adjustments to the calibrator’s internal control sensor based on the readings from the PRT. This has limited value because the unique characteristics of the reference PRT, which essentially become “calibrated into” the calibrator, are often quite different from the thermometers tested by the calibrator. This is complicated by the presence of significant thermal gradients in the block and inadequate sensor immersion into blocks that are simply too short.

Metrology Wells are different. Temperature gradients, loading effects, and hysteresis have been minimized to make the calibration of the display much more meaningful. We use only traceable, accredited PRTs to calibrate Metrology Wells and our proprietary electronics consistently demonstrate repeatable accuracy more than ten times better than our specs, which range from ±0.1 °C at the most commonly used temperatures to ±0.25 °C at 661 °C.

An application note is available to help better understand the uncertainties mentioned above.

For even better accuracy, Metrology Wells may be ordered with built-in electronics for reading external PRTs with ITS-90 characterizations. (See sidebar, Built in Reference Thermometry)

Product Details:

• Intrinsically-safe, battery operated, portable reference thermometer
• Provides accuracy of ±0.05°C (±0.09°F) over full range
• Features intrinsically-safe operation (ATEX and IECEx compliant)
• Measures -80 °C to 300 °C ( -112 °F to 572 °F)
• Provides user-configurable temperature with Trend/Stability indicator
• Displays temperature in °C or °F

Product Details:

• Intrinsically-safe, battery operated, portable reference thermometer
• Provides accuracy of ±0.05°C (±0.09°F) over full range
• Features intrinsically-safe operation (ATEX and IECEx compliant)
• Measures -50 °C to 160 °C (-58 °F to 320 °F)
• Provides user-configurable temperature with Trend/Stability indicator
• Displays temperature in °C or °F

Product Details:

• Full-featured documenting process calibrator for calibrating and troubleshooting
• Measures volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
• Sources and simulate volts, mA, pressure, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
• Powers transmitters during test using loop supply with simultaneous mA measurement

Product Details:

• Complete pressure, temperature, and mA loop calibrator
• Troubleshoot and calibrate HART smart digital transmitters
• Create calibration procedures and automatically document results
• Connect to calibration management software

Product Details:

• Full HART Device Description (DD) support of all HART devices
• Configure HART devices
• Perform HART trim on HART devices when used with a Fluke 750 or 720 series calibrator
• Monitor device PV, SV, TV, QV and other measured HART variables
• Convenient wireless connectivity to HART modem
• Easy to use, fast connect and view HART data
• Store HART device configurations
• Long range wireless communication up to 250 feet

Product Details:

• Automatically measure power and power quality parameters
• At-a-glance power quality health for faster troubleshooting
• Easily view V/A/Hz, power, dips, swells, and harmonics data
• Capture high-speed transients up to 8 kV
• Power directly from measurement circuit without a line cord

Product Details:

Dry-wells are typically calibrated by inserting a calibrated PRT into one of the wells and making adjustments to the calibrator’s internal control sensor based on the readings from the PRT. This has limited value because the unique characteristics of the reference PRT, which essentially become “calibrated into” the calibrator, are often quite different from the thermometers tested by the calibrator. This is complicated by the presence of significant thermal gradients in the block and inadequate sensor immersion into blocks that are simply too short.

Metrology Wells are different. Temperature gradients, loading effects, and hysteresis have been minimized to make the calibration of the display much more meaningful. We use only traceable, accredited PRTs to calibrate Metrology Wells and our proprietary electronics consistently demonstrate repeatable accuracy more than ten times better than our specs, which range from ±0.1 °C at the most commonly used temperatures to ±0.25 °C at 661 °C.

Product Details:

Built-in features to address large workloads and common applications

Whether you need to calibrate 4-20 mA transmitters or a simple thermostatic switch, a Field Metrology Well is the right tool for the job. With three models covering the range of –25 °C to 660 °C, this family of Metrology Wells calibrates a wide range of sensor types. The optional process version (models 914X-X-P) provides a built-in two-channel thermometer readout that measures PRTs, RTDs, thermocouples, and 4-20 mA transmitters which includes the 24 V loop supply to power the transmitter.

Each process version accepts an ITS-90 reference PRT. The built-in readout accuracy ranges from ±0.01 °C to ±0.07 °C depending on the measured temperature. Reference PRTs for Field Metrology Wells contain individual calibration constants that reside in a memory chip located inside the sensor housing, so sensors may be used interchangeably. The second channel is user-selectable for 2-, 3-, or 4-wire RTDs, thermocouples, or 4-20 mA transmitters. For comparison calibration, don’t hassle with carrying multiple instruments to the field. Field Metrology Wells do it all as a single instrument.

Traditionally, calibrations of temperature transmitters have been performed on the measurement electronics, while the sensor remained uncalibrated. Studies have shown, however, that typically 75% of the error in the transmitter system (transmitter electronics and temperature sensor) is in the sensing element. Thus, it becomes important to calibrate the whole loop—both electronics and sensor.

The process option of Field Metrology Wells makes transmitter loop calibrations easy. The transmitter sensor is placed in the well with the reference PRT and the transmitter electronics are connected to the front panel of the instrument. With 24 V loop power, you are able to power and measure the transmitter current while sourcing and measuring temperature in the Field Metrology Well. This allows for the measurement of as-found and as-left data in one self-contained calibration tool.

All Field Metrology Wells allow for two types of automated thermostatic switch test procedures—auto or manual setup. Auto setup requires the entry of only the nominal switch temperature. With this entry, it will run a 3-cycle calibration procedure and provide final results for the dead band temperature via the display. If you need to customize the ramp rate or run additional cycles, the manual setup allows you to program and run the procedure exactly how you would like. Both methods are fast and easy and make testing temperature switches a virtual joy!

Product Details:

• High performance loop calibrator for calibration, repair, and maintenance
• Features large display and simple, quick-click interface for easy one-handed operation.
• Provides simultaneous mA and % readout for quick, easy interpretation of readings.
• Delivers mA accuracy of 0.015%
• Provides 1 µA resolution for mA source, simulate, and measure

Product Details:

• Pressure calibrator with built-in electric pump for one-handed pressure calibration
• Offers best-in-class pressure measurement uncertainty of 0.025%
• Measures and sources mA with best in class 0.015% accuracy to test valves and I/Ps
• Calibrates 30 psi and 100 psi pressure ranges
• Features precision pressure adjustment vernier for easy and accurate pressure calibration

Product Details:

• Powerful loop calibrator that provides a very cost effective, integrated solution for calibration, repair, and maintenance of milliamp loops
• Provides simultaneous mA and % readout for quick, easy interpretation of readings.
• Delivers mA accuracy of 0.02%
• Features push button 25% steps for fast, easy linearity checks

Product Details:

• Compact mA calibrator for measuring 0-20 mA or 4-20 mA signals
• High accuracy—0.01% and 1 µA resolution
• Measures voltage output process signals from PLCs and transmitters
• Sources or simulates 4-20 mA loop current
• Sources voltage to 100 mV or 10 V

Product Details:

• mA precision loop calibrator that communicates with and tests HART smart instruments
• Features best-in-class accuracy at 0.01% reading
• Provides intuitive user interface with Quick-Set knob for fast setup
• Includes built in selectable 250 Ω resistor for HART communication
• Features 24 V DC loop power with mA measure mode (-25% to 125%)

Product Details:

Product Details:

• Dual-input digital oscilloscope and multimeter in a ScopeMeter® test tool
• Available with a 40 MHz or 20 MHz oscilloscope bandwidth
• Features Connect-and-View™ trigger simplicity for hands-off operation
• Includes IntellaSet™ technology to automatically and intelligently adjust numerical readout based on measured signal
• Provides a dual-input waveform and meter reading recorder for trending data over extended periods

Product Details:

• Key measurements: Automatically capture and log voltage, current, power, power factor, energy and associated values
• Convenient instrument powering: You can power the instrument directly from the measured circuit instead of mains outlets
• Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream

Product Details:

• Calibration of both temperature and pressure transmitters
• Measure/source/simulate mA loop parameters
• Measure and source mA, Volts DC, frequency, and resistance
• Built-in 24 V loop power supply
• Store and recall frequently used calibration set ups

Product Details:

The Model 9009 includes two independently controlled temperature blocks. The hot block provides temperatures from 50 °C to 350 °C, while the cold block covers the range –15 °C to 110 °C. Each block is controlled by a precision Hart Scientific temperature controller. These aren’t some off-the-shelf controllers we glued into a box. These are Hart Scientific controllers from the leading temperature company in the world.

Each temperature block includes two wells with removable inserts. You can calibrate four probes at once, or you can calibrate two probes at the same time with an external reference (like Hart’s Model 1521 LLK Thermometer), or you can use the two temperature wells to get quick “zero" and “span" references for transmitter calibrations.

Need portability and durability? The 9009 is housed in a tough Pelican™ case that is both airtight and watertight. It’s a small package weighing only 10 pounds, yet it fits everything you need, including a power cord and four extra inserts. Inserts are available to accommodate sensors of any size from 1/16" (1.6 mm) to 7/16" (11.1 mm). This rugged system can go anywhere.

Of course the 9009 also delivers the performance you expect from a Hart Scientific temperature source. The cold block is calibrated to within ±0.2 °C with stability of ±0.05 °C. The hot block’s display is accurate to ±0.6 °C with stability of ±0.05 °C. A NIST-traceable calibration is included for each of the two test blocks.

For use with automated systems, the 9009 comes with an RS-232 connection, which allows you to control and monitor temperatures from your PC. For completely automated calibrations, Hart’s MET/TEMP II software also integrates with the 9009.

Two blocks in one unit, a total range of –15 °C to 350 °C, portability, durability, versatility, performance, automation. Hart Scientific delivers it all.

Product Details:

The most accurate temperature and humidity graphical data loggers on the market

The DewK measures temperature to ±0.125 °C and humidity to ±1.5% on two channels, and displays it on a big, clear screen. Ethernet, wireless (optional), or RS-232 will allow you to network as many DewKs as you’d like. And the Log Ware III software will allow real-time logging of multiple DewKs, data storage to your computer and seamless integration with MET/CAL® software.

• Superior accuracy
• Network enabled
• Powerful logging and analysis tools
• Two interchangeable calibrated sensors
• Huge memory
• Upgraded software

Product Details:

These three units beat every other comparable dry-well in the industry in performance, size, weight, convenience, ease of calibration, software, and price. In addition, the heating and cooling rate of each of these dry-wells is adjustable from the front panel, thermal switches can be checked for actuation testing, and multiple-hole inserts are available for a variety of probe sizes.

Hart dry-wells are easy to calibrate. You don't even have to open the case. This means less maintenance costs and less down time when they do need calibration.

Our Interface-it software lets you adjust set-points and ramp rates, log dry-well readings to a file, create an electronic strip chart, and perform thermal switch testing with data collection. The software is written for Windows and has a great graphical interface. Regardless of whether you want basic software or a completely automated calibration system, we've got what you want. Read about all our great packages starting on page 80.

Every dry-well we ship is tested at our factory, and every unit comes with a NIST-traceable calibration. There's no extra charge for the report, because we consider it an essential ingredient in our quality program. You shouldn't have to pay extra for calibration procedures we perform anyway.

Product Details:

The 1523 Reference Thermometer measures, graphs, and records PRTs, thermocouples, and thermistors. This thermometer readout delivers exceptional accuracy, wide measurement range, logging, and trending, all in a handheld tool you can take anywhere.

The 1523 lets you handle field applications, laboratory measurements, and data logging with ease.

Product Details:

• Precision multifunction, temp, frequency, voltage, and mA calibrator
• Calibrates thermocouples and RTD temperature instruments
• Stores up to eight calibration results in memory for analysis
• Built-in 24 V Loop Power Supply

Product Details:

• Key valve testing functions include pre-configured valve signature test, speed test, step test, manual test, and bump/partial stroke test
• Key mA loop calibrator functions include mA source, mA simulate, mA read, mA read/loop power, and volts read
• ValveTrack™ Software enables upload to a PC for further in-depth analysis of valve measurements that are logged and recorded to memory

Product Details:

• High performance intrinsically safe loop calibrator for use in potentially explosive environments
• Is certified in accordance with ATEX directive (Ex II 2 G Ex ia IIC T4) in Zones 1 and 2 and to operate in accordance with Factory Mutual N.I. Class 1, Division 2 areas Group A-D
• Features large display and simple, quick-click interface for easy one-handed operation

Product Details:

• All-in-one PV system test solution meeting IEC 62446-1 standards for Category 1 and Category 2 tests
• Open-circuit voltage (VOC) measurement at the PV module/string up to 1000 V DC
• Short-circuit (ISC) current measurement at the PV module/string up to 20 A DC
• On-location I-V curve results compares manufacturer I-V curve data to measured data on the analyzer screen
• Compatible with Fluke TruTest™ data management software

• Rugged, compact advanced insulation resistance tester for electrical contractors and industrial and commercial electricians
• Automatically calculates Polarization Index and Dielectric Absorption Ratio
• Makes repetitive tests simple and easy with a Compare (Pass/Fail) function 
• Offers multiple insulation test voltages: 50 V, 100 V, 250 V, 500 V, and 1000 V

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

• A unique earth ground tester that performs testing with and without stakes
• Tests 3- and 4-pole fall-of-potential, and 4-pole soil resistivity (with stakes)
• Performs selective earth ground rod testing (one clamp + stakes)
• Performs stakeless earth ground rod testing (two clamps)
• Features Automatic Frequency Control (AFC) to minimize the effect of interference

• Measure solar irradiance, ambient and PV module temperature, array orientation and tilt angles
• Make instantaneous measurements to determine the watts per square meter solar irradiation, required by IEC 62446-1 standard
• High contrast LCD with large numbers for easy readability in direct sunlight
• Includes convenient carry case with shoulder strap

Additional Information:

• Minimum Order Quantity: 1 Piece

• Measure solar irradiance, ambient and PV module temperature, array orientation and tilt angles
• Make instantaneous measurements to determine the watts per square meter solar irradiation, required by IEC 62446-1 standard
• High contrast LCD with large numbers for easy readability in direct sunlight
• Part of the Fluke solution for I-V curve measurements, the IRR2-BT wirelessly communicates with the SMFT-1000 for instant and accurate readings

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

Pressure calibration and temperature measurement for custody transfer applications

The ideal tool for gas custody transfer applications in potentially explosive atmospheres is the Fluke 721Ex Precision Pressure Calibrator. With dual isolated pressure sensors, it allows you to take simultaneous static and differential pressure measurements with a single tool.

The 721Ex can be configured by selecting either a 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar).

• Intrinsically Safe (721Ex version only) – IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
• Pt100 RTD input for temperature measurement, (probe optional)
• Switch test on both pressure inputs
• Pressure displayed in the user’s choice of 19 engineering units
• Large backlit graphic display can display up to three inputs simultaneously
• Store five instrument setups for recall and use

• Versatile, three-phase power loggers for conducting energy, load and power quality studies.
• Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles.
• Convenient instrument powering directly from the measured circuit
• Download and analyze every detail of energy consumption and power quality state of health with our automated reporting.

Additional Information:

• Minimum Order Quantity: 1 UNIT

Product Details:

• Easy to use tool for precision alignment of rotating shafts
• Features single laser measurement technology to reduce errors from backlash and enhance accuracy
• Provides an intuitive, guided user interface to quickly and easily complete machine alignments
• Includes compass measurement mode to enable flexible, reliable, and repeatable measurements using an activated electronic inclinometer