FLUKE PRODUCTS

Product Details:

• NEW: Leak volume and cost indication on the go
• NEW: CO2 emission reporting
• Improve energy efficiency. Do more with the same air compressors and delay the capital expense of purchasing an additional compressor
• Lower utility and downtime costs 
• Reduce time and costs to detect leaks
• Improve production process and pneumatic equipment reliability

Product Details:

• PDQ Mode™: Capture and analyze partial discharge
  On device partial Discharge classification & PRPD plot
• LeakQ™: On device leak rate and cost calculation
  Online CO2 emission reporting
• Reduce outages and increase uptime
• Cut costs and save energy everyday by finding and fixing PD

Product Details:

• 320 x 240 resolution
• 2 meter drop test
• LaserSharp™ Auto Focus
• Manual or automatic focus
• Measure up to 650 °C
• Subject to Export Control

Product Details:

• Choose the thermal camera that gives you in-focus images in a matter of seconds. LaserSharp™ Auto Focus uses a built-in laser distance meter that calculates and displays the distance from your designated target and immediately adjusts the focus.
• See small details in the image and discover anomalies faster with 640 x 480 resolution thermal images
• On the thermal camera, adjust the level of infrared and visible light with patented IR-Fusion™ technology
• Manage data, capture multiple measurements (mechanical, electrical and thermal) and organize them by piece of equipment with Fluke Connect™ software
• Simply the best optics to transmit energy and produce high quality infrared images. Fluke thermal cameras use only 100% diamond-turned germanium lenses with specialty coatings.
• Subject to Export Control

Product Details:

• Continuous touchscreen IR-Fusion™
• 5 hours battery life
• Can withstand drop up to 2 meter
• Water and dust resistant—IP54 enclosure rating
• Automatically organize and file thermal images with Fluke Connect™ Asset Tagging
• 120 x 90 infrared resolution

Product Details:

• Increased sensitivity to visualize temperature differences
• Easier to visualize and diagnose issues with sharper onscreen images, multiple rectangle markers and 9 color palettes
• More intuitive visual interface, improved, user-tested, touch screen interface
• More flexibility to visualize target, tiny-to-large with interchangeable smart lenses - no calibration required, 2x and 4x telephoto, wide angle and macro lens compatibility

Product Details:

• Rugged, superbly engineered 640 x 480 thermal imaging camera
• Provides large 5.7-inch responsive LCD touchscreen with 150% more viewing area than 3.5-inch screen
• Features 240° rotating screen for unmatched shooting flexibility
• Provides 4x the pixel data with on-camera SuperResolution to create a 1280 x 960 resolution image
• Subject to Export Control

Product Details:

• Streaming thermal image capture and analysis via Smartview R&D desktop software
• MATLAB and LabVIEW software compatibility allows users to integrate thermal data, images and videos to support R&D analysis
• 320 x 240 resolution
• See the details you need with optional smart lenses: 2x and 4x telephoto, macro and wide angle

Product Details:

• Automatically organize and file thermal images with Fluke Connect Asset Tagging
• Fully radiometric thermal imager gives you measurement data to the pixel with 120 x 90 infrared resolution (10,800 pixels)
• 3.5” LCD touchscreen display for easy troubleshooting
• -20 °C to +400 °C and -20 °C to 150 °C temperature measurement range models
• Six color palette

Product Details:

• Increased sensitivity to visualize temperature differences
• Easier to visualize and diagnose issues with sharper onscreen images, multiple rectangle markers and 9 color palettes
• More intuitive visual interface, improved, user-tested, touch screen interface
• More flexibility to visualize target, tiny-to-large with interchangeable smart lenses - no calibration required, 2x and 4x telephoto, wide angle and macro lens compatibility

Product Details:

• 256 x 192 infrared resolution
• Asset Tagging
• Touchscreen IR Fusion™
• Manual and fixed focus
• Measure up to 550 °C
• Engineered to withstand 2 meter drop

Product Details:

• 384 x 288 infrared resolution
• Asset Tagging
• Touchscreen IR Fusion™
• IS3 and AVI video recording
• Measure up to 550 °C
• Dew-point calculation

Product Details:

• 320 x 240 resolution
• 2 meter drop test
• IR Fusion™ technology for context
• Fixed focus
• Measure up to 400 °C
• Subject to Export Control

Product Details:

Fluke 561 Infrared and Contact Thermometer, -40-1022 Degree F Range, 12:1 Ratio

• IR thermometer for quick measurements up close or at a distance, without a ladder
• Compatible with all standard mini-connector K-type thermocouples
• Velcro pipe probe for superheat, sub-cooling or other contact and ambient measurements
• Single-point laser sighting
• Temperature range optimized for HVAC/R applications
• Easy emissivity adjustment for measuring pipes and ducts more accurately
• Lightweight (only 340 grams (12 ounces)) and portable
• Very easy to use
• Efficient – no need to shut down equipment when making IR measurements
• MIN, MAX and DIF temperature readings help you quickly identify problems

Product Details:

• Contact and non-contact thermometer in one
• Measures temperatures from -40°C to 800°C (-40°F to 1472°F) accurate to +1.0°C or +1.0% of reading (whichever is greater)
• Features rugged, ergonomic design that stands up to tough industrial, electrical, and mechanical environments.
• Offers a distance-to-spot ratio of 50:1
• Works with most K-type thermocouples

Product Details:

Multifunction tester that tests to all local regulations

• Includes "Insulation Pre-test" that detects when appliances are connected to the system and stops the test
• Runs seven installation tests automatically in one sequence with a single connection through Auto Test
• Allows you to share test results in real time over your smartphone via Fluke Connect Measurements
• 6 mA RDC-DD testing for EV charging stations

Product Details:

• EASY SETUP
  Quickly create asset list and work order on your PC, setup machine profiles using Fluke Connect App on your smart device, push routes to your 805 FC for your technicians in the field.
• CONSISTENT DATA QUALITY
  Take accurate, reliable measurements at both low and high frequency ranges
• MOBILE DATA ACCESS
  Store results in the cloud and share data with your team remotely
• INNOVATIVE SENSOR DESIGN
  Minimize measurement variations caused by device angle or contact pressure

Product Details:

• Locate energized and de-energized wires quickly and accurately in walls, ceilings, and floors
• Find breaks or opens and shorts, and identify breakers and fuses easily
• CAT IV 600 V safety rated
• Includes the i400 AC Current Clamp accessory for inducing a tracing signal on the cable when there is no access to bare conductors

Product Details:

• 600V CAT IV/1000V CAT III rated for use at the service entrance and downstream
• Power instrument directly from the measured circuit
• Automatically capture and log voltage, current, power, power factor, energy and associated values

The new Fluke 1732 and 1734 Three-Phase Electrical Energy loggers introduce a new simplicity to discovering sources of electrical energy waste. Discover when and where energy in your facility is being consumed; from the service entrance to individual circuits. Access and share data remotely with your team via the Fluke Connect® app so you can maintain safer working distances and make critical decisions in real-time, reducing the need for protective equipment, site visits and check-ins.

Profiling energy usage across your facility helps you identify opportunities for energy savings, and provides you with the data you need to act on them. The new Energy Analyze software package allows you to compare multiple data points over time to build a complete picture of energy usage, which is the first step to reduce the cost of your energy bill.

Analysis and Reporting

Capturing logged data is just one part of the task. Once you have the data, you need to create useful information and reports that can be easily shared and understood by your organization or customers. Fluke Energy Analyze Plus software makes that task as simple as possible. With powerful analysis tools and the ability to create customized reports in minutes you’ll be able to communicate your findings and quickly solve problems so you can optimize system reliability and savings.

Applications

Load studies: Discover how much energy individual pieces of equipment are consuming when they are operating at minimum and maximum capacity. Check capacity of circuits prior to adding additional loads (various standards exist for this process; in the US the NEC 22087 is the recommended standard). Load studies can also identify situations where you may be exceeding the allowable load on the circuit or when an agreed peak demand applies from the utility. For convenience, some load studies simply measure current which makes installation of the measuring equipment quick and easy. It is often recommended that load surveys be performed for 30 days so that all typical load conditions are encountered during the test.

Energy assessments: Quantify energy consumption before, and after improvements, to justify energy saving devices.

Energy surveys: Users often ask where measurements should be taken for an energy survey. The answer is multiple points within the facility. Start at the main service feeders; compare the power and energy measured here with the readings from the utility meter to ensure you’re receiving the correct charges. Then move downstream to the larger loads; these should be easy to identify by the current rating of the electrical panels downstream of the service entrances.

Measuring at many points will allow a full picture of energy usage across the facility to be developed. The next question users typically have is how long an energy survey should last. This of course depends on the facility, but it is recommended that you measure for a period that matches a typical facility activity period. If the facility operates over a five day work week with down time on the weekend, a seven day survey will most likely capture typical conditions. If the facility operates at a constant level for 24 hours a day, 365 days a year, a single day could be reasonably representative as long as you avoid a period where there may be planned maintenance.

Product Details:

• Intrinsically safe infrared and contact thermometer
• Meets intrinsically safe certifications in Class I Div. 1 and Div. 2 or Zone 1 and 2 hazardous environments
• Measures temperatures from -40°C to 800°C (-40°F to 1472°F)
• Comes with a conductive case to safely carry the IR thermometer into hazardous areas
• Offers a distance-to-spot ratio of 50:1

Product Details:

• Bright 7" high resolution LCD touch screen
• High Definition, dual view imaging probe and adjustable light to provide a clear image
• Variety of rugged and high-resolution accessory probes available to address your specific application needs
• Improved battery charging and management
• Macro to micro zoom
• Up-is-Up™ technology for an appropriate orientation, regardless of the probe location or position
• Fluke Connect™ support including wireless image transfer

Product Details:

• Report PoE class (0-8)
• Display network switch speeds capabilities up to 10G
• Ethernet Alliance Certified to IEEE-802.3™ standards
• Display cable length, wiremap and distance to fault
• Locate and trace cable with toning (probe sold separately)

Product Details:

• Pressure ranges to 10,000 psi (700 bar)
• 0.015% of reading accuracy standard (0.008% optional)
• Single or dual piston formats
• Built-in hand pumps standard
• Mounted spirit level with adjustable feet
• Units can be trimmed to local gravity FOC

Product Details:

• Pressure ranges to 60,000 psi (4000 bar)
• 0.015% of reading accuracy standard (0.008% optional)
• Single or dual piston format
• Built-in hand pumps standard
• Mounted spirit level with adjustable feet
• Units can be trimmed to local gravity FOC

Product Details:

• Intrinsically safe multifunction process calibrator
• Meets I.S. Class I, Division 1 Groups B-D, 171°C compliance standards
• Measures volts DC, mA, RTDs, thermocouples, frequency, and ohms
• Sources or simulates volts DC, mA, RTDs, thermocouples, frequency and ohms

Product Details:

• Calibration of both temperature and pressure transmitters
• Measure/source/simulate mA loop parameters
• Measure and source mA, Volts DC, frequency, and resistance
• Built-in 24 V loop power supply
• Store and recall frequently used calibration set ups

Product Details:

• Complete pressure, temperature, and mA loop calibrator
• Troubleshoot and calibrate HART smart digital transmitters
• Create calibration procedures and automatically document results
• Connect to calibration management software

Product Details:

• Pressure Source and mA Measurement to calibrate pressure devices
• Built-in pump for sourcing pressure to 300 PSI
• Easy-to-clean, field-serviceable, integrated pressure pump
• Built-in switch test for calibrating pressure switches
• Extend pressure capabilities by using Fluke 750P pressure modules

Product Details:

• Unique integrated electric pump for one handed pressure calibration
• Test pressure switches easily with easy-to-use switch test function
• Precision pressure adjust vernier for easy and accurate pressure calibration
• Ideal accuracy and performance (0.025%) for reference class transmitter calibration
• 30 psi, 150 psi and 300 psi pressure ranges
• Programmable pressure calibrator pump limit:
  • Eliminates over-pressurization
  • Allows the user to program target pressures for pumping
• Extended pressure measurement range with any of 29 750P Pressure Modules
• Pump cleanout ports reduce pump failures from moisture and fluid damage
• Fluid trap included with the unit to mitigate chance of fluid damage in at-risk applications
• Precision temperature measurement with optional RTD probe

Product Details:

• Easily generate pressure to 10 000 psi (70 MPa)
• New: Vernier fine adjustment control
• New: Tool-free test connectors for easy, leak free connections
• Test port connectors include adaptors for common sizes of NPT and BSP
• New: Robust design with improved reservoir valve sealing

Product Details:

• Combines the functionality of both contact and non-contact thermometers in a single device
• Capable of accurately measuring a wide temperature range, from -40°C to 800°C (-40°F to 1472°F), with precision up to +1.0°C or +1.0% of the reading (whichever is greater)
• Boasts a robust, ergonomic design built to withstand challenging industrial, electrical, and mechanical settings
• Provides an impressive distance-to-spot ratio of 50:1, ensuring accurate measurements from a safe distance
• Compatible with the majority of K-type thermocouples, offering versatility and convenience

Product Details:

• Contact and non-contact IR thermometer for measuring up close or at a distance, without a ladder
• Measures temperature from -40°C to 550° C (-40°F to 1022°F)
• Works with all standard mini-connector type K thermocouples
• Provides single-point laser sighting
• Allows easy emissivity adjustment for measuring pipes and other shiny surfaces more accurately

Product Details:

• Two-in-one IR and contact thermometer with a 30:1 distance-to-spot ratio
• Measures temperatures from -40°C to 650°C (40°F to 1202°F)
• Makes it easy to access advanced features with the soft-key buttons and graphical display
• Features rugged, ergonomic design that stands up to tough industrial, electrical, and mechanical environments
• Works with most K-type thermocouples

Product Details:

• High temperature infrared thermometer that measures from -30°C to 900°C (-22°F to 1652°F)
• Offers an ultra-high 60:1 distance-to-spot ratio with dual laser sighting for fast, accurate targeting
• Features a user-selectable multi-language interface
• Displays the temperature plus MAX, MIN, DIF, AVG temperature
• Provides adjustable emissivity and a predefined emissivity table

Product Details:

• Laser targeting for use from -30 °C to 350 °C (-22 °F to 662 °F)
• Small, rugged design easily fits your hand and your toolbox
• Easy-to-read, backlit LCD screen

Product Details:

• Easy to handle infrared thermometer with precise laser targeting and 10:1 distance to spot ratio
• Measures temperatures from -30°C to 500°C (-22°F to 932°F)
• Provides IP40 rating for extra protection
• Presents a large, backlit LCD display for easy viewing
• Features a small, lightweight design that fits easily fits into your tool bag

Product Details:

• Extremely rugged – 3-meter drop tested, IP54 for dust and moisture
• Precise dual-lasers for more accurate, repeatable measurements
• Provides up to a 12:1 Distance to spot ratio

Product Details:

• Calibrate up to four tri-clamp sanitary sensors at the same time
• Wide temperature ranges cover most process applications:
  • 6109A: 35 °C to 250 °C
  • 7109A: –25 °C to 140 °C
• Excellent display accuracy of ±0.1 °C provides 4:1 test uncertainty ratio (TUR) for critical applications
• Easy to transport up stairs and across catwalks
• Stainless steel casing withstands harsh sterilizing chemicals and is rust proof
• Easy to use and maintain
• Global Fluke support and service

Product Details:

• Lightweight, portable, and fast
• Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current
• True reference thermometry with accuracy to ±0.01 °C
• On-board automation and documentation
• Metrology performance in accuracy, stability, uniformity, and loading

Product Details:

• Intrinsically safe infrared and contact thermometer
• Meets intrinsically safe certifications in Class I Div. 1 and Div. 2 or Zone 1 and 2 hazardous environments
• Measures temperatures from -40°C to 800°C (-40°F to 1472°F)
• Comes with a conductive case to safely carry the IR thermometer into hazardous areas
• Offers a distance-to-spot ratio of 50:1